QMI 3-Step Fuel System Cleaner
• For professional use, designed for automotive service center
application.
• Contains no alcohol or methanol, eliminating concerns about
technicians’ health and sensitive components.
The QMI 3-Step Fuel System Cleaner kit helps eliminate rough idling,
misfiring, power loss, pinging, knocking and engine run-on. Helps
improve performance and fuel economy, and reduce emissions. Cleans
quickly, safely and effectively.
Step 1—Fuel System Cleaner
A premium, high tech formula designed to clean the complete fuel system
from the gas tank to the exhaust. This concentrated formula dissolves
gum, varnish and carbon deposits. Highly effective detergents clean the
fuel injectors or carburetor, intake valves and combustion chambers.
Scavenges water from the fuel system. Lubricates injectors, valves,
upper cylinders and rings, while improving combustion and reducing
exhaust emissions.
Step 2—Oil System Treatment
Lubricating oil-based detergent formula to safely and gently protect and
condition the crankcase while removing oil system deposits, gums and
varnish. Contains friction modifiers and extreme pressure components to
protect engine friction surfaces while cleaning. This oil-based product
is designed to remain in the crankcase for a full oil change interval,
providing more complete crankcase cleaning.
Step 3—Induction Cleaner
A two-stage intake deposit cleaner. Quickly dissolves gum and varnish
deposits from the intake manifold and runners, valves, pistons and
combustion chambers. Residual cleaner continues to soften hard carbon
deposits for more thorough, long lasting cleaning. Lubricates while
cleaning. Helps reduce build-up in the catalytic converter and reduce
exhaust emissions. No alcohol/methanol formula is safe for the vehicle,
environment and technicians.
QMI Engine Treatment with PTFE
Benefits
• Reduced friction and wear
• Increased engine life
• Reduced heat
• Improved performance
• Reduced maintenance
• Easier starting
• Reduced fuel consumption
• Longer oil life
QMI Engine Treatment is not a typical additive, and does not compromise
oil’s lubricating characteristics. QMI Engine Treatment goes beyond oil
to “treat” lubricated metal surfaces with a sub-micron fusion of PTFE,
like “wet ice on wet ice.” Friction and wear diminish, and performance
and engine life increase. QMI Engine Treatment is Sequence IIIE tested
safe and effective, and meets engine manufacturers’ warranty
requirements. (See QMI PTFE Treatment Concept.)
QMI Motorcycle Treatment with PTFE
Benefits
• Reduced friction and wear
• Increased engine life
• Reduced heat
• Improved performance
• Reduced maintenance
• Easier starting
• Reduced fuel consumption
• Longer oil life
Motorcycle engines place extreme demands on lubricants. High revving,
hot running motorcycle power generates a need for protection beyond the
most sophisticated motor oils. QMI Motorcycle Treatment meets this need
without compromising critical motor oil properties. (See QMI PTFE
Treatment Concept.)
QMI Small Engine Treatment with PTFE
Benefits
• Reduced friction and wear
• Easier starting
• Reduced heat and stress
• Improved performance
• Reduced maintenance
• Increased engine life
• Protection against corrosive attack during off season storage
Small 2-cycle engines with no crankcase oil sump are especially
vulnerable to lubrication problems. Off-season storage results in
corrosion. Hard starting and poor idling frequently frustrate operators.
QMI’s PTFE protection brings many benefits to these hardworking little
engines. (See QMI PTFE Treatment Concept.)
QMI Automatic Transmission Treatment with PTFE
Benefits
• Reduced friction and wear
• Enhanced shifting
• Reduced heat and stress
• Improved performance
• Reduced costly repairs
• Increased component life
• Rejuvenate seals
• Longer ATF life
• Keep control mechanisms operating freelyl
Automatic transmissions are complex systems that operate under high
temperature and stress. Survival demands that all components function
freely, and repairs are costly. QMI Automatic Transmission Treatment
helps keep automatic transmissions running trouble free. As a
metal-to-metal friction surface treatment, QMI Automatic Transmission
Treatment does not compromise critical ATF properties, and does not
cause slippage of automatic transmission metal-to-fiber clutch disks and
bands. (See QMI PTFE Treatment Concept.)
QMI Gear Treatment with PTFE (30 wt. & 90 wt.)
Benefits
• Reduced friction and wear
• Increased component life
• Reduced heat and stress
• Improved performance
• Reduced maintenance
• Easier shifting
• Reduced noise
• Reduced energy consumption
With the growing demand for energy efficiency, lower viscosity gear oils
provide less cushioning for working gear and bearing surfaces, often
resulting in increased wear and decreased transmission/gear box life.
QMI’s PTFE treatment provides added protection, reducing wear and heat,
improving performance and extending component life. (See QMI PTFE
Treatment Concept.)
QMI Hydraulic Treatment with PTFE
Benefits
• Reduced friction and wear
• Increased component life
• Reduced heat and stress
• Improved performance
• Reduced maintenance
• Reduced cavitation
• Reduced energy consumption
• Reduced noise
• Protection against corrosives
• Longer oil life
Hydraulic fluid must transmit power, lubricate moving parts, cool and
dissipate heat and seal clearances between components. Lubrication of
hydraulic pumps poses a major challenge. The many types of hydraulic
pumps all generate substantial friction and heat, and QMI Hydraulic
Treatment provides much needed lubrication protection. (See QMI PTFE
Treatment Concept.)
QMI Compressor Treatment with PTFE
Benefits
• Reduced friction and wear
• Increased compressor life
• Reduced heat and stress
• Improved performance
• Reduced maintenance
• Reduced noise
• Reduced energy consumption
• Longer oil life
• Protection against moisture and corrosive attack
Air compressor lubrication must address the challenge of heat and
moisture produced from compressed air. QMI’s PTFE protection plays
critical roles in long-term compressor operation, reduced down time and
enhanced performance. (See QMI PTFE Treatment Concept.)
QMI Air Tool Treatment with PTFE
Benefits
• Restores sluggish tools
• Increased tool life
• Reduced friction and wear
• Improved performance
• Reduced heat and noise
• Protection against moisture
• Reduced maintenance
• Protection against corrosives
• Reduced energy consumption
• Reduced cavitation
Air tools operate at extremely high RPMs with minimal lubricating fluid.
The corrosive attack of moisture from compressed air causes cavitation
of bearing and working surfaces. Gumming of blades and vanes result in
reduced RPMs, loss of torque and expensive repair costs. Neglect and
lack of regular lubrication can lead to premature air tool failure. QMI
Air Tool Treatment lubricates beyond oil, reducing friction and
improving performance, protecting against cavitation, protecting against
seizure during storage and extending air tool life. Sluggish air tools
are often restored quickly by applying QMI Air Tool Treatment. (See QMI
PTFE Treatment Concept.)
QMI Power Steering Treatment with PTFE
Benefits
• Reduced friction and wear
• Easier steering
• Reduced heat and noise
• Improved oil life
• Reduced maintenance
• Improved pump life
• Reduced cavitation
• Improved performance
More power in your steering with QMI Power Steering Treatment protection
for trucks, automobiles, fork lifts—everything with power steering
units. (See QMI PTFE Treatment Concept.)
QMI Water Glycol Treatment with PTFE
Benefits
• Reduced friction and wear
• Increased life
• Reduced heat and noise
• Improved performance
• Reduced maintenance
• Reduced vibration
• Reduced energy consumption
• Longer water glycol life
• Protection against corrosives
• Increased resale value
Hydraulic systems utilizing fire-resistant water glycol operate under
high temperature and stress without the benefit of petroleum
lubrication, which can result in shortened component life, reduced
energy efficiency and costly repairs. Protect water glycol hydraulic
systems with QMI’s specialized PTFE treatment, like “wet ice on wet
ice,” as a substitute wear surface that reduces heat and increases
energy efficiency while prolonging life and trouble-free operation. (See
QMI PTFE Treatment Concept.)
QMI Fuel Treatment
Benefits
• Water scavengers permanently solubilizes water in fuel, thus
converting water from a potential fuel system “problem” into a
“combustion improver.”
• Detergents clean gums and varnishes from the fuel system and harmful
deposits from fuel injectors, intake valves and the combustion chambers.
• Top oils lubricate the injector pump, fuel injectors, valves,the
upper cylinder area and top rings.
• Increases octane ratings in gasoline.
• Combustion modifiers slow the fuel burn for more power, better mileage
and less emissions.
• Works as a catalyst to enhance the completeness of the burn and reduce
pinging.
Today’s high tech, hot running, close tolerance engines are prone to
fuel system deposit related driveability problems. QMI Fuel Treatment
helps remove deposits and conditions the fuel system with the combined
benefits of many fuel treatments in one economical, easy-to-use product.
Contains no alcohol or methanol.
QMI Paint Sealant with PTFE
Benefits
• Ultimate shine and protection
• Sun shield protects against fading
• Seals against oxidation, corrosives, dirt and insects
• Dirt and grime wash off more easily
• Safe for clear-cote applications
• Easily applied by hand
• Extremely durable
QMI Paint Sealant with PTFE seals professionally painted surfaces
with a hard, mirror-like finish. PTFE is chemically inert, providing
protection from corrosives, salts and insects, and never turns gray or
yellow when exposed to sunlight. Designed for all enamel, lacquer, metal
flake and metallic painted surfaces, fiberglass, Formica and wood
surfaces, QMI Paint Sealant with PTFE can be applied to automobiles,
marine vehicles, aircraft and household applications such as counter
tops, sinks, bath tubs, showers, finished wood furniture, etc.
QMI Paint De-Oxidizer
Benefits
• Effective—removes oxidation, blemishes, road film, detergent build-up,
insects
• Rejuvenates—restores luster
• Gentle—no harsh abrasives to leave scratch marks or remove excess
paint
• Preserves paint—does not remove unoxidized paint
• Repaintable—specialized ingredients eliminate repainting problems
• Easy clean-up—applicators wash clean with soap and water
QMI Paint De-Oxidizer, the paint preserving no-scratch oxidation
remover, the safe, gentle, effective paint rejuvenating compound,
removes oxidation while cleaning and restoring original luster to paint
without harsh abrasives found in most rubbing compounds. Removes
blemishes and surface scratches, water spots, acid rain deposits,
chemical build up, overspray, etc. Paint shops love QMI Paint
De-Oxidizer because it is easy to use (by hand or with an orbital
buffer) and is repaintable.
QMI Engine Clean/Flush
Benefits
• Concentrated oil-based formula
• Safely removes internal sludge deposits
• Cleans valves and lifters, helps free sticky lifters
• Cleans gum, varnish and deposits from piston ring land area
• Improves oil circulation to all engine parts
• Restores elasticity in seals to reduce valve deposits
• Promotes a more complete drain of used oil
• Extreme Pressure Agents–Friction Modifiers
• Improves lubrication of critical areas
• Protects against loss of lubrication during cleaning
• Keeps cylinder walls and other solvent contact areas lubricated
• Extends engine life by reducing wear
Oil system contaminants can accumulate to become deposits that shorten
engine life by restricting oil circulation throughout the engine, and
cause reduced compression, increased oil consumption and other problems.
QMI Engine Clean removes these contaminants and prevents them from
becoming engine damaging deposits. Contains no harsh solvents to attack
seals and gaskets.
QMI 220 Water Resistant Grease with PTFE
Benefits
• Superior water resistance
• Excellent wear resistance
• Excellent shear stability
• Resists heat & oxidation
• Extends maintenance intervals
• PTFE wear reduction and corrosion protection
• Protects against high loads, shock, welding & scoring
QMI 220 Water Resistant Grease provides long-term lubrication with a
blend of highly refined petroleum oils and PTFE, chemically
inert to prevent corrosives from attacking vital parts. Resists
contaminants found in steel, paper mill and numerous other applications.
The thickener is a sophisticated aluminum complex selected to provide a
high level of resistance to water washout and wet chum deterioration.
The blend of boundary lubricants and polymers reduce friction and wear
while improving the load carrying capabilities. The complex thickener
and boundary lubricants also aid in forming a stronger seal against the
intrusion of water and water-borne contaminants. Use of this grease may
reduce lubrication intervals as much as five to one.
QMI Non-Melting Grease with PTFE
Benefits
• Extreme temperature
• Reduced friction and wear
• Super adhesion and cohesion
• Protection against corrosion
• Extreme pressure
• Water insoluble
QMI Non-Melting Grease is blended with PTFE to meet the most demanding
grease lubrication conditions today. PTFE is chemically inert and
prevent corrosives from attacking vital parts. Functional under
conditions range from -20°F (-29°C) to intermittent temperatures of
+550°F (+288°C), this grease offers all-weather pumpability, anti-rust
protection, and is resistant to water penetration, and “stays put” with
superior adhesion and cohesion.
QMI H-1 Food Grade Grease with PTFE
Benefits
• USDA H-1 Authorized
• Contains PTFE • Clear, clean lubricant
• Biodegradable
• Nontoxic, nonstaining
• Extremely water resistant
• Nondrying formula
• Reduces friction
• Prevents rust, corrosion
• Odorless, colorless
QMI H-1 Food Grade Grease meets the unique hygienic needs of the meat,
poultry and food industries with a multi-purpose lubricant.
Aluminum-complex thickener for extreme water-resistance combines with
advanced synthetic ingredients and PTFE protection. QMI H-1 Food
Grade Grease is USDA authorized for use in federally inspected meat and
poultry plants. Functional under conditions ranging from -2O°F to 400°F
(-28°C to 204°C), this grease is unsurpassed in reducing friction,
extending equipment life and preventing the formation of rust and
corrosion.
QMI White Lithium Grease with PTFE
Benefits
• Convenient, easy to use aerosol spray
• Reduced friction and wear
• Clean White color
• Protection against corrosion
• Multi-Purpose
• Extreme pressure
• Extreme temperature
• Water unsoluble
• Super adhesion and cohesion
QMI White Lithium Grease with PTFE is a unique high performance all
purpose grease in an easy to use aerosol can. This grease goes beyond
traditional lubrication and plates critical metal wear surfaces with a
micro-thin layer of PTFE. Ideal for metal-to metal-lubrication, the
aerosol can is easy to use in all those hard to reach places. Functional
under conditions ranging from -20°F to 370°F (-29°C to 188°C), this
grease offers anti-rust protection, is resistant to water penetration
and “stays put” with superior adhesion and cohesion.
QMI All-Purpose Cleaner
Benefits
• Economical, extremely concentrated.
• One heavy duty industrial detergent for most cleaning jobs.
QMI All-Purpose Cleaner is a highly concentrated industrial grade
cleaner. Fast acting synthetic detergents, alkalies and wetting agents
combine to utilize powerful cleaning action such as emulsification,
saponification and wetting power. Tenacious combinations of grease
bonded soils respond quickly. Provides general purpose cleaning when
heavily diluted with water, and is a great degreaser when less diluted.
Rinsibility is assured, simply flush with water or wipe off.
Safe: biodegradable, nonflammable, without noxious odors.
QMI Barrier Creme
Benefits
• Protects skin from absorption of harmful contaminants.
• Protects against cracking and peeling.
• Protects against chemicals, solvents, detergents and numerous skin
irritants.
• Protects against many skin allergies
• Non-irritating
• Lasts for hours.
QMI Barrier Creme forms an invisible protective barrier that blocks out
skin irritants while locking in moisture and the skin’s natural oils.
Will not effect the sense of touch or feel, and allows the skin to
breathe and perspire. Transforms cracked and peeling hands into younger,
smoother looking hands. Helps protect against oil and grease, resins,
glues, graphite, cement, abrasives, glass wool, washing sodas, caustic
sodas, gasoline, diesel, kerosene, copy machine toner, industrial
disinfectants, most inks, lacquers, synthetic soaps and most solvents,
and provides temporary emergency splash protection against sulfuric
acid, hydrochloric acid, nitric acid, phosphoric acid and citric acid.
QMI 256F Disinfectant/Sanitizer
Benefits
• Fast acting
• Chlorine-free
• Highly concentrated
• Kill HIV (AIDS virus) Herpes Simplex 1 and Type 2, Influenza A/Brazil
and Vaccinia
• Effective against a broad spectrum of gram negative and gram positive
organisms
• Approved for food contact surfaces
• Highly concentrated, economical
QMI 256F Disinfectant/Sanitizer is a proven “one step”
disinfectant-cleaner-fungicide-mildewstat-virucide, effective against a
broad spectrum of bacteria, viruses (including HIV) and fungi, and
inhibits the growth of mold and mildew and their odors.
Disinfectant: One gallon blends with 256 gallons of water for
fungicide-mildewstat, cleaner and disinfectant against a broad spectrum
of gram negative and gram positive organisms.
Sanitizer: One gallon blends with 1,408 gallons of water for a food
contact surface sanitizer.
QMI ClearKil Antiseptic Hand Wash
Benefits
• Kills germs in seconds
• Alcohol-free
• Will not dry the skin like alcohol based products
• Non-Irritating
• Saves valuable time
• Economical
• Recommended for continual use
QMI ClearKil is a waterless hand wash, developed to supplement routine
hand washing or when soap and water is not available. Time kill studies
show QMI ClearKil to be 99.99% effective within 30 seconds against a
broad spectrum of both gram-negative and gram-positive bacteria, fungi
and yeasts. Excellent for food processing, meat and poultry plants,
citrus, breweries and hospitals, medical and dental offices, labs and
emergency service personnel.
|
